CE Compliant certified

CE Compliant

Made in the USA certified

Made in the USA

Used Plastic Extruders for Sale

On Line Controls, Inc. offers precision control equipment for plastic tubing extrusion lines, including MicroAir ultra-low air pressure regulators and motorized potentiometers. These products enable accurate diameter control, stable pressure regulation, and proportional control for medical, automotive, and industrial plastic tubing extrusion applications worldwide.

10 turn wirewound - 2 Watt - 100 ohm to 100K - 1.5″ x 5 1/4″ L
Single turn Conductive plastic - 1 Watt - 500 ohm to 100K - 1 1/4″Dia X 5.4″L
Single Channel MicroAir II
AC Motorized Potentiometers
10 turn wirewound - 5 Watt - 10 ohm to 100K - 2″ square x 8.5″ L
Single Channel MicroAir IV
Dual Channel MicroAir II
Single turn wirewound - 0.5 Watt - 10 ohm to 20K - 2″ x 5.25″ L
10 turn wirewound - 2 Watt - 100 ohm to 100K - 7/8″ Dia x 4 3/4″ L
10 turn wirewound - 2 Watt - 1K/1K, 2K/2K, 5K/5K, 10K/10K, 2K/3K, 5K/10K - 1 1/4″Dia x 5 3/4″ L
Dual Channel MicroAir I
Dual Channel MicroAir IV
10 turn wirewound - 2 Watt - 100 ohm to 100K - 1 1/4″Dia x 6″ L
10 turn wirewound - 2 Watt - 100 ohm to 100K - 1.5″ x 5″ L
Motorized Rheostats
Single Channel MicroAir I
MultiAir 4-channel MicroAir IV
MultiAir 3-channel MicroAir IV
MultiAir 3-channel MicroAir II
Single turn conductive plastic - 2 Watt - 1K to 100K - 2″ square x 4″ L
MultiAir 3-channel MicroAir I
100 watt with 115 VAC motor
10 turn wirewound - 2 Watt - 100 ohm to 100K - 1.5″ x 6 3/4″ L
DC Motorized Potentiometer
Single turn Conductive plastic - 1 Watt - 50 ohm to 20K Standard - 1 3/8″ Dia x 3.76″L 5.5″L
Single turn wirewound - 0.5 Watt - 10 ohm to 20K - 1 3/8″ Dia x 3.76″L Dual 4.25″L
Single turn conductive plastic - 1 Watt - 500 ohm to 20K Standard - 1.5″ x 4 3/4″ L
Single turn conductive plastic - 1 Watt - 500 ohm to 20K Standard - 1.5″ x 5″ L
Single turn wirewound - 0.5 Watt - 1K/1K, 2K/2K, 3K/3K, 5K/5K, 5K/10K, 10K/10K - 1.5″ x 5.25″ L
Single turn conductive plastic - 2 Watt - 500 ohm to 100K - 2″ square x 4 1/4″ L
10 turn wirewound - 2 Watt - 100 ohm to 100K - 1 1/4″Dia x 4 3/4″ L
10 turn wirewound - 2 Watt - 100 ohm to 100K - *
10 turn wirewound - 2 Watt - 100 ohm to 100K - 1.5″ x 6 1/2″ L
10 turn wirewound - 2 Watt - 1K/1K, 2K/2K, 3K/3K, 5K/5K, 5K/10K, 10K/10K - 1.5″ x 6″ L
10 turn wirewound - 2 Watt - 100 ohm to 100K - 1 3/8″Dia x 4″ L
10 turn wirewound - 2 Watt - 5K/5K/5K normal. Others available. - 1 1/4″Dia x 7″ L
3 turn hybrid - 1 Watt - 1K to 100K - 7/8″Dia x 4 3/4″ L
10 turn wirewound - 5 Watt - 100 ohm to 100K Normal 1K - 2″ Square x 6 3/4″ L
Single turn wirewound - 0.5 Watt - 10 ohm to 20K - 1.5″ x 5″ L
50 watt with 115 VAC motor
50 watt with DC motor
25 watt with 115 VAC motor
25 watt with DC motor

Our Range of Products

10 turn wirewound - 2 Watt - 100 ohm to 100K - 1.5″ x 5 1/4″ L

10 turn wirewound - 2 Watt - 100 ohm to 100K - 1.5″ x 5 1/4″ L

  • 2W wirewound, 100 ohm to 100K range
  • Circuit board with braking diode included
  • Slip clutch with manual override capability
Single turn Conductive plastic - 1 Watt - 500 ohm to 100K - 1 1/4″Dia X 5.4″L

Single turn Conductive plastic - 1 Watt - 500 ohm to 100K - 1 1/4″Dia X 5.4″L

  • 10 million turns life expectancy guaranteed
  • Japanese one-piece motor geartrain quality
  • 500 ohm to 100K resistance range options
Single Channel MicroAir II

Single Channel MicroAir II

  • Accepts contact closure from O.D. gauge input
  • Hysteresis-free regulating action for stability
  • Ranges from 0-3" water up to 0-5 psi
AC Motorized Potentiometers

AC Motorized Potentiometers

  • 0.5W to 5W models for varied applications
  • 1 to 50 million turns life by element type
  • Wire-wound or conductive plastic element types
10 turn wirewound - 5 Watt - 10 ohm to 100K - 2″ square x 8.5″ L

10 turn wirewound - 5 Watt - 10 ohm to 100K - 2″ square x 8.5″ L

  • 5W wirewound, 10 ohm to 100K resistance range
  • Snap-action switches at each end of travel
  • Starting capacitor and braking diode included
Single Channel MicroAir IV

Single Channel MicroAir IV

  • Sub-0.1 sec response to flow rate changes
  • Three modes: Dual State, Linear, and Manual
  • 0-10V PLC input with 110/220 VAC dual voltage

Showing 1 to 6 of 43 results

Frequently Asked Questions

How much is a plastic extrusion machine?

Plastic extrusion machine costs vary widely — from $20,000 for small bench-top units to over $500,000 for large industrial lines. The precision control components that regulate tubing diameter during extrusion, such as MicroAir air pressure regulators and motorized potentiometers from On Line Controls, are priced separately and available on request based on configuration and channel count.

How much is an extrusion machine?

What is a MicroAir air pressure regulator used for in plastic extrusion?

What types of plastic tubing can OLC control equipment be used with?

Do MicroAir regulators require calibration or frequent maintenance?

Can OLC equipment integrate with PLCs and diameter gauges?

Does On Line Controls ship internationally, and what warranty is included?

Didn't find what you're looking for?

Talk to our experts for custom solutions and tailored guidance.

Industries We Serve

Medical Device Manufacturing

Medical Device Manufacturing

Precision air control for catheter, multi-lumen, and medical-grade plastic tubing extrusion diameter accuracy.

Automotive Tubing Production

Automotive Tubing Production

Reliable pressure regulation for extruding automotive-grade plastic tubing with consistent wall thickness and OD.

Industrial Automation & Process Control

Industrial Automation & Process Control

Motorized potentiometers and rheostats enabling precise proportional control in speed, flow, and tensioning systems.

Plastic Profile & Specialty Extrusion

Plastic Profile & Specialty Extrusion

Multi-channel air pressure regulators supporting plastic profile, straw, and micro-tube extrusion dimensional control.

Didn't find what you're looking for?

Talk to our experts for custom solutions and tailored guidance.

You might also like

Why Plastic Tubing Manufacturers Choose On Line Controls, Inc.

44+ Years of Extrusion Expertise

Founded in 1980 specifically to serve plastic tubing manufacturers, OLC brings over four decades of precision engineering and real-world extrusion experience to every product.

Industry-Leading Precision & Reliability

MicroAir regulators provide hysteresis-free pressure control down to below 1 inch of water, with product lifespans of 10–20 years and no calibration required.

Global Sales & 3-Year Warranty Support

OLC ships directly to 18 countries worldwide and backs every product with a 3-year parts and labor warranty plus unlimited phone support for complete buyer confidence.

Get a Quote for Extrusion Control Equipment Today

Submit your requirements and our team will respond with pricing, technical guidance, and configuration options tailored to your extrusion line.

Contact Us Today

For immediate assistance, feel free to give us a direct call at 978-562-5353. You can also send us a quick email at olc@onlinecontrols.com.